Open Menu

All Knowledge bases

  • KB-0012 Customise Alarm actions

    To customise the alarm notification process even further, for example sending different information depending on the alarm state, you can use scripting.

  • KB-0013-0-EN - HITACHI serial cables

    Cable layout for serial connection between eWON and EH-PLC or H252C PLC.

  • KB-0014 Modem connection fallback for eWON2005-Talk2M

    Script Example

  • KB-0015 Switch to enable WAN or VPN connection

    Use the digital input of the eWON to enable or disable the WAN or VPN connetion (Internet connection) via a key switch for example. This document shows the eWON's configuration to set up but also the BASIC script to write in a Flexy.

  • KB-0016 How to establish a Leased Line connection in FW4.3

    Config Example

  • KB-0017 How to trigger manually an outgoing connection on modem

    Sometimes it is useful to trigger an outgoing connection by scripting. This could then allow for example to establish a connection to the Internet or to Talk2M when an eWON Tag or an acquired tag is changed.

  • KB-0018 Using eWON with OpenVPN

    This KB explains the different parameters which can be configured on the eWON for VPN connections. Advanced use only.

  • KB-0019 How to transfer a viewON project to another PC

    This document will help you transfer a viewON project from your PC to another PC

  • KB-0020 Configure your eWON using FTP

    Use an FTP connection to the eWON to change its configuration settings (config.txt, comcfg.txt, program.bas).
    This document also explains the use of the var_lst file (var_lst.txt or var_lst.csv).

  • KB-0021 Use of Topics for Tag Polling

    For each I/O Server, there are 3 topics (A, B, C) that you can define. In those topics you can choose the frequency of polling. You can also specify on which PLC you would like to read the linked Tags. 
    If you want to poll on more then 3 PLC then do not specify the destination equipment inside the Topic, but specify it in the Tag configuration.